0
Your shopping cart is empty!

Search

Search:

Products meeting the search criteria

//
Show:
Sort By:
12V 300 RPM MonsterBorg motor (P37UK12)
These are the same motors which power our MonsterBorg kits. ..
£10.90
Ex Tax: £9.08
Based on 0 reviews.
12V 100 RPM Motor, YetiBorg Wheel and Mounting Kit
Designing your own robot? This helpful kit is a great starting point if you are building your own chassis.  It has everything you need to add a powered wheel, just add some wire and a motor controller such as our ThunderBorg and you are rea..
£17.99
Ex Tax: £14.99
Based on 0 reviews.
12V 100 RPM Small Motor
Small sized 12V, 100 RPM motor. The shaft is approximately 8mm in length and is 3mm in diameter and works well with our 3mm hub. Specification Voltage VDC: 12V No Load Speed: 110RPM No Load Current: 0.12A Rated Speed: 100RPM ..
£10.00
Ex Tax: £8.33
Based on 0 reviews.
3V Motor and Wheel in Yellow
One DC motor and wheel, great for use with a PicoBorg. Can be used to make roving Robots from the Raspberry Pi. 15rpm output shaft gearbox means powerful enough to tackle inclines and carpet at around 3 meters/min 3V motor, 160mA so can..
£5.99
Ex Tax: £4.99
Based on 0 reviews.
3mm Hub - Compatible with 4Borg Kit
Brass hub kits for connecting wheels to motors. All of our hubs look identical but have different sized motor shaft diameters ranging from 3mm to 7mm in 1 mm increments. Please measure carefully before buying these hubs. This is the 3mm hub, it is..
£1.99
Ex Tax: £1.66
Based on 0 reviews.
4mm Hub - Compatible with DiddyBorg Kits
Brass hub kits for connecting wheels to motors. All of our hubs look identical but have different sized motor shaft diameters ranging from 3mm to 7mm in 1 mm increments. Please measure carefully before buying these hubs. This is the 4mm hub, it is..
£1.99
Ex Tax: £1.66
Based on 0 reviews.
5mm Hub - Compatible with Large Stepper Motor
Brass hub kits for connecting wheels to motors. All of our hubs look identical but have different sized motor shaft diameters ranging from 3mm to 7mm in 1 mm increments. Please measure carefully before buying these hubs. This is the 5mm hub, it is..
£1.99
Ex Tax: £1.66
Based on 0 reviews.
6V 180 RPM Small Motor
Small sized 6V, 180 RPM motor, the same ones we use on the Formula Pi YetiBorgs. Typical running current of 150 mA with a stall current of 450 mA and a no load current of ~30 mA. Rated for 130 g.cm of torque. The shaft is approximately 8mm in l..
£10.00
Ex Tax: £8.33
Based on 0 reviews.
6V 30 RPM Mini Metal Gear Motor
Approx 17mA draw at 6V free running, approx 50mA under load. This version comes as the motor on its own. It is also available soldered with wires. Soldered version comes with approximately 5.5" of 22 awg solid core wire soldered on to the ..
£3.50
Ex Tax: £2.92
Based on 0 reviews.
6V 30 RPM Mini Metal Gear Motor with Soldered Wires
Approx 17mA draw at 6V free running, approx 50mA under load.  This version comes soldered with wires. It is also available on its own. Soldered version comes with approximately 5.5" of 22 awg solid core wire soldered on to the te..
£7.00
Ex Tax: £5.83
Based on 0 reviews.
6V 60 RPM Motor, DiddyBorg Wheel & Mounting Kit
Designing your own robot? This helpful kit is a great starting point if you are building your own chassis.  It has everything you need to add a powered wheel, just add some wire and a motor controller such as our ThunderBorg and you ar..
£16.99
Ex Tax: £14.16
Based on 0 reviews.
6mm Hub - Compatible with MonsterBorg Kits
Brass hub kits for connecting wheels to motors. All of our hubs look identical but have different sized motor shaft diameters ranging from 3mm to 7mm in 1 mm increments. Please measure carefully before buying these hubs. This is the 6mm hub, it is..
£1.99
Ex Tax: £1.66
Based on 0 reviews.
7mm Hub
Brass hub kits for connecting wheels to motors. All of our hubs look identical but have different sized motor shaft diameters ranging from 3mm to 7mm in 1 mm increments. Please measure carefully before buying these hubs. This is the 7mm hub compat..
£1.99
Ex Tax: £1.66
Based on 0 reviews.
Advanced Motor Bracket Mount
Quality powder coated steel motor mount. Accepts PiBorg 20mm, 25mm and 28mm motors. Motor not included. Click here for dimensions ..
£4.99
Ex Tax: £4.16
Based on 0 reviews.
Diablo - Dual 55A Motor Controller
Diablo is the most powerful PiBorg motor control board to date - the ultimate in motor control! It controls two DC motors in forwards and reverse with pulse width modulation (PWM) which is useful for speed control and various stepper and solenoid ..
£66.00
Ex Tax: £55.00
Based on 0 reviews.
Large Stepper Motor with 5mm Shaft (Four Wire)
A 4 wire bipolar stepper motor with 1.8 degrees per step giving you fine control over whatever you choose to step! Can be controlled using our ThunderBorg motor controller. 4 wire, 200 steps per revolution, 12V DC suggested operation at 400..
£16.99
Ex Tax: £14.16
Based on 0 reviews.
MG966R Large Servo Motor
High torque servo motor with a massive 10kg.cm stall torque. This mighty servo comes with 4 different horns, mounting screws and signal cable. It has metal output gears to reduce the possibility of gear stripping. Stall torque at 4.8V - 9.4k..
£10.99
Ex Tax: £9.16
Based on 0 reviews.
Medium Sized Vibration Motor
Vibrating motor, great for haptic/force feedback, or vibration sorting. 1.5V to 3V Draws approximately 1.2A Approximately 40mm in length, 24mm in diameter. Can be used with our motor controllers PicoBorg, ZeroBorg or ThunderBorg. ..
£4.00
Ex Tax: £3.33
Based on 0 reviews.
PicoBorg - Quad Motor Controller
Our teeniest motor controller can be used to turn on and off DC fans, motors, solenoids, relays and more all from your Raspberry Pi. Capable of 2 A in total, for example 4 motors at 0.5 A each. There are 4 low side drivers so you can turn on and..
£7.99
Ex Tax: £6.66
Based on 0 reviews.
PicoBorg - Quad Motor Controller with Soldered Wires
Our teeniest motor controller can be used to turn on and off DC fans, motors, solenoids, relays and more all from your Raspberry Pi. Capable of 2 A in total, for example 4 motors at 0.5 A each. There are 4 low side drivers so you can turn on and o..
£12.00
Ex Tax: £10.00
Based on 0 reviews.
PicoBorg Reverse - Dual 5A Motor Controller
If you want to power your Rapspberry Pi from batteries at the same time check out our ThunderBorg controller instead :) PicoBorg Reverse is a dual motor control board for use with your Raspberry Pi. Control BIG or small m..
£31.99
Ex Tax: £26.66
Based on 0 reviews.
SG92R Small Servo Motor
Micro servo motor for turning tiny things. It has 2.5kg.cm stall torque. This tiny servo comes with 3 different horns, mounting screws and signal cable. Stall torque at 4.8V - 2.5kg.cm Maximum rotation 180 degrees Supply voltage - 3.0 to ..
£7.99
Ex Tax: £6.66
Based on 0 reviews.
Small 5V Stepper Motor (Five Wire)
Five wire, 5v stepper motor suitable for use with PicoBorg. Wire to your PicoBorg as follows: M1+ Not connected M1- Stepper Blue M2+ Stepper Red (center tap) M2- Stepper Yellow ..
£4.50
Ex Tax: £3.75
Based on 0 reviews.
ThunderBorg - Dual 5A Motor Controller with DC/DC & RGB LED
ThunderBorg is a powerful dual motor control board for making awesome robots with your Raspberry Pi. ThunderBorg is designed to handle up to 5A per motor connection, so it's great for bigger-than-your-average-buggy projects and making awesom..
£37.00
Ex Tax: £30.83
Based on 0 reviews.
ThunderBorg with Lid - Dual 5A Motor Controller with DC/DC, 2xRGB LEDs and Power Connector
ThunderBorg is a powerful dual motor control board for making awesome robots with your Raspberry Pi. The ThunderBorg is used in our MonsterBorg robot kit. All ThunderBorg versions include: Control BIG or small motors..
£43.99
Ex Tax: £36.66
Based on 0 reviews.
ZeroBorg - Quad 1.5A Motor Controller - Triple Stack (KS3 Model Unsoldered)
The ZeroBorg is our add on board for controlling motors using the Raspberry Pi Zero. It's small size means it fits neatly below a Raspberry Pi Zero and opens up endless possibilities for tiny robot designs. The ZeroBorg can control 4 motors in..
£63.00
Ex Tax: £52.50
Based on 0 reviews.
ZeroBorg Basic - Quad Motor Controller
The ZeroBorg is our add on board for controlling motors using the Raspberry Pi Zero. It's small size means it fits neatly below a Raspberry Pi Zero and opens up endless possibilities for tiny robot designs. The ZeroBorg can control 4 motors in..
£18.00
Ex Tax: £15.00
Based on 0 reviews.
ZeroBorg Complete - Quad Motor Controller
The ZeroBorg is our add on board for controlling motors using the Raspberry Pi Zero. It's small size means it fits neatly below a Raspberry Pi Zero and opens up endless possibilities for tiny robot designs. The ZeroBorg can control 4 motors in..
£32.50
Ex Tax: £27.08
Based on 0 reviews.
ZeroBorg Triple Stack - Quad Motor Controller
The ZeroBorg is our add on board for controlling motors using the Raspberry Pi Zero. It's small size means it fits neatly below a Raspberry Pi Zero and opens up endless possibilities for tiny robot designs. The ZeroBorg can control 4 motors in..
£65.50
Ex Tax: £54.58
Based on 0 reviews.

Blog Search Result

There is no article that matches the search criteria.