Small sized 6V, 180 RPM motor, the same ones we use on the Formula Pi YetiBorgs. Typical running current of 150 mA with a stall current of 450 mA and a no load current of ~30 mA. Rated for 130 g.cm of torque. The shaft is approximately 8mm in l..
Approx 17mA draw at 6V free running, approx 50mA under load. This version comes as the motor on its own. It is also available soldered with wires. Soldered version comes with approximately 5.5" of 22 awg solid core wire soldered on to the ..
Approx 17mA draw at 6V free running, approx 50mA under load. This version comes soldered with wires. It is also available on its own. Soldered version comes with approximately 5.5" of 22 awg solid core wire soldered on to the te..
Designing your own robot? This helpful kit is a great starting point if you are building your own chassis. It has everything you need to add a powered wheel, just add some wire and a motor controller such as our ThunderBorg and you ar..
The PicoBorg is an ultra compact motor controller for the Raspberry Pi! With PicoBorg, you can turn on and off fans, motors, solenoids or relays from your Raspberry Pi. There are 4 low side drivers, so you can turn on and off 4 devices, and one de..
The PicoBorg Reverse is an advanced, bi-directional (forward and reverse), dual motor control board for use with the Raspberry Pi. The PicoBorg Reverse is designed to control two BIG (or small) motors up to 5A each! Great for bigger-than-your-av..
£31.99 Ex Tax: £26.66
PREV 1 of 1 NEXT
Blog Search Result
There is no article that matches the search criteria.