0
Your shopping cart is empty!
Show:
Sort By:
10x AA Holder
Our favourite way to power our robots is using AA batteries. They're readily available and pose a lower risk of fire compared to Lithium based batteries, especially when learning about robotics. To secure your batteries you need a good holder,..
£3.50 £3.15
Ex Tax: £2.63
Based on 0 reviews.
2x AA Holder
Our favourite way to power our robots is using AA batteries. They're readily available and pose a lower risk of fire compared to Lithium based batteries, especially when learning about robotics. To secure your batteries you need a good holder,..
£2.50 £2.25
Ex Tax: £1.87
Based on 0 reviews.
4x AA Holder
Our favourite way to power our robots is using AA batteries. They're readily available and pose a lower risk of fire compared to Lithium based batteries, especially when learning about robotics. To secure your batteries you need a good holder,..
£2.50 £2.25
Ex Tax: £1.87
Based on 0 reviews.
5V DC/DC Regulator
OKI-78SR-5/1.5-W36H-C DC/DC regulator 7.5Watts, 5V at 1.5A. Ideal for use with BattBorg, ZeroBorg, ThunderBorg or any projects in need of a good regulator. Highly efficient ~90%. Provides 5V from a 7 to 36 volt input. Unlike noisy UBECs, this..
£6.00 £5.40
Ex Tax: £4.50
Based on 0 reviews.
6x AA Holder
Our favourite way to power our robots is using AA batteries. They're readily available and pose a lower risk of fire compared to Lithium based batteries, especially when learning about robotics. To secure your batteries you need a good holder,..
£3.00 £2.70
Ex Tax: £2.25
Based on 0 reviews.
8x AA Holder
Our favourite way to power our robots is using AA batteries. They're readily available and pose a lower risk of fire compared to Lithium based batteries, especially when learning about robotics. To secure your batteries you need a good holder,..
£3.00 £2.70
Ex Tax: £2.25
Based on 0 reviews.
Basic 9V Connector Cable
Basic no frills 9v (PP3) style connector. Thin cables are ok for low power connections. If you are after high current connections such as driving motors, please see our Quality 9V cable. These work really well with our 2AA to 10AA holders&nbs..
£1.00 £0.90
Ex Tax: £0.75
Based on 0 reviews.
BattBorg Full Soldered Kit - Power your Raspberry Pi from Batteries
The BattBorg is a power converter for your Raspberry Pi which allows you to power the Raspberry Pi off batteries. It will work with most batteries/battery packs that are between 7-36V so it's great for 12V car batteries, 8xAA battery packs, and s..
£15.50 £13.95
Ex Tax: £11.63
Based on 0 reviews.
BattBorg Full Unsoldered Kit - Power your Raspberry Pi from Batteries
The BattBorg is a power converter for your Raspberry Pi which allows you to power the Raspberry Pi off batteries. It will work with most batteries/battery packs that are between 7-36V so it's great for 12V car batteries, 8xAA battery packs, and s..
£13.00 £11.70
Ex Tax: £9.75
Based on 0 reviews.
BattBorg Soldered Board - Power your Raspberry Pi from Batteries
The BattBorg is a power converter for your Raspberry Pi which allows you to power the Raspberry Pi off batteries. It will work with most batteries/battery packs that are between 7-36V so it's great for 12V car batteries, 8xAA battery packs, and s..
£13.00 £11.70
Ex Tax: £9.75
Based on 0 reviews.
BattBorg Unsoldered Board & Parts - Power your Raspberry Pi from Batteries
The BattBorg is a power converter for your Raspberry Pi which allows you to power the Raspberry Pi off batteries. It will work with most batteries/battery packs that are between 7-36V so it's great for 12V car batteries, 8xAA battery packs, and s..
£10.50 £9.45
Ex Tax: £7.88
Based on 0 reviews.
Toggle Switch (SPST)
Small SPST (on/off) toggle switch useful for connecting battery packs or making controls. Rated for up to 5A. Body dimensions: 13.5mm wide x 7mm deep x 13.5mm high (including contacts). Overall height: 33mm including toggle. Thread diameter:..
£3.00 £2.70
Ex Tax: £2.25
Based on 0 reviews.