0
Your shopping cart is empty!
Show:
Sort By:
12V 300 RPM MonsterBorg motor (P37UK12)
These are the same motors which power our MonsterBorg kits. ..
£10.90 £9.81
Ex Tax: £8.17
Based on 0 reviews.
12V 100 RPM Motor, YetiBorg Wheel and Mounting Kit
Designing your own robot? This helpful kit is a great starting point if you are building your own chassis.  It has everything you need to add a powered wheel, just add some wire and a motor controller such as our ThunderBorg and you are rea..
£17.99 £16.19
Ex Tax: £13.49
Based on 0 reviews.
12V 100 RPM Small Motor
Small sized 12V, 100 RPM motor. The shaft is approximately 8mm in length and is 3mm in diameter and works well with our 3mm hub. Specification Voltage VDC: 12V No Load Speed: 110RPM No Load Current: 0.12A Rated Speed: 100RPM ..
£10.00 £9.00
Ex Tax: £7.50
Based on 0 reviews.
3mm Hub - Compatible with 4Borg Kit
Brass hub kits for connecting wheels to motors. All of our hubs look identical but have different sized motor shaft diameters ranging from 3mm to 7mm in 1 mm increments. Please measure carefully before buying these hubs. This is the 3mm hub, it is..
£1.99 £1.79
Ex Tax: £1.49
Based on 0 reviews.
3V Motor and Wheel in Yellow
One DC motor and wheel, great for use with a PicoBorg. Can be used to make roving Robots from the Raspberry Pi. 15rpm output shaft gearbox means powerful enough to tackle inclines and carpet at around 3 meters/min 3V motor, 160mA so can..
£5.99 £5.39
Ex Tax: £4.49
Based on 0 reviews.
4mm Hub - Compatible with DiddyBorg Kits
Brass hub kits for connecting wheels to motors. All of our hubs look identical but have different sized motor shaft diameters ranging from 3mm to 7mm in 1 mm increments. Please measure carefully before buying these hubs. This is the 4mm hub, it is..
£1.99 £1.79
Ex Tax: £1.49
Based on 0 reviews.
5mm Hub - Compatible with Large Stepper Motor
Brass hub kits for connecting wheels to motors. All of our hubs look identical but have different sized motor shaft diameters ranging from 3mm to 7mm in 1 mm increments. Please measure carefully before buying these hubs. This is the 5mm hub, it is..
£1.99 £1.79
Ex Tax: £1.49
Based on 0 reviews.
6mm Hub - Compatible with MonsterBorg Kits
Brass hub kits for connecting wheels to motors. All of our hubs look identical but have different sized motor shaft diameters ranging from 3mm to 7mm in 1 mm increments. Please measure carefully before buying these hubs. This is the 6mm hub, it is..
£1.99 £1.79
Ex Tax: £1.49
Based on 0 reviews.
6V 180 RPM Small Motor
Small sized 6V, 180 RPM motor, the same ones we use on the Formula Pi YetiBorgs. Typical running current of 150 mA with a stall current of 450 mA and a no load current of ~30 mA. Rated for 130 g.cm of torque. The shaft is approximately 8mm in l..
£10.00 £9.00
Ex Tax: £7.50
Based on 0 reviews.
6V 30 RPM Mini Metal Gear Motor
Approx 17mA draw at 6V free running, approx 50mA under load. This version comes as the motor on its own. It is also available soldered with wires. Soldered version comes with approximately 5.5" of 22 awg solid core wire soldered on to the ..
£3.50 £3.15
Ex Tax: £2.63
Based on 0 reviews.
6V 30 RPM Mini Metal Gear Motor with Soldered Wires
Approx 17mA draw at 6V free running, approx 50mA under load.  This version comes soldered with wires. It is also available on its own. Soldered version comes with approximately 5.5" of 22 awg solid core wire soldered on to the te..
£7.00 £6.30
Ex Tax: £5.25
Based on 0 reviews.
6V 60 RPM Motor, DiddyBorg Wheel & Mounting Kit
Designing your own robot? This helpful kit is a great starting point if you are building your own chassis.  It has everything you need to add a powered wheel, just add some wire and a motor controller such as our ThunderBorg and you ar..
£16.99 £15.29
Ex Tax: £12.74
Based on 0 reviews.
7mm Hub
Brass hub kits for connecting wheels to motors. All of our hubs look identical but have different sized motor shaft diameters ranging from 3mm to 7mm in 1 mm increments. Please measure carefully before buying these hubs. This is the 7mm hub compat..
£1.99 £1.79
Ex Tax: £1.49
Based on 0 reviews.
Advanced Motor Bracket Mount
Quality powder coated steel motor mount. Accepts PiBorg 20mm, 25mm and 28mm motors. Motor not included. Click here for dimensions ..
£4.99 £4.49
Ex Tax: £3.74
Based on 0 reviews.
DiddyBorg Wheel Pair in Blue
A pair of DiddyBorg style wheels in Blue for your robots. They have a 12mm hex connector which can be used with our brass hubs. ..
£7.99 £7.19
Ex Tax: £5.99
Based on 0 reviews.
DiddyBorg Wheel Pair in Red
A pair of DiddyBorg style wheels in Raspberry Red for your robots. They have a 12mm hex connector which can be used with our brass hubs. ..
£7.99 £7.19
Ex Tax: £5.99
Based on 0 reviews.
DiddyBorg Wheel Pair in Silver
A pair of DiddyBorg style wheels in Silver for your robots. They have a 12mm hex connector which can be used with our brass hubs. ..
£7.99 £7.19
Ex Tax: £5.99
Based on 0 reviews.
Large Stepper Motor with 5mm Shaft (Four Wire)
A 4 wire bipolar stepper motor with 1.8 degrees per step giving you fine control over whatever you choose to step! Can be controlled using our ThunderBorg motor controller. 4 wire, 200 steps per revolution, 12V DC suggested operation at 400..
£16.99 £15.29
Ex Tax: £12.74
Based on 0 reviews.
Medium Sized Vibration Motor
Vibrating motor, great for haptic/force feedback, or vibration sorting. 1.5V to 3V Draws approximately 1.2A Approximately 40mm in length, 24mm in diameter. Can be used with our motor controllers PicoBorg, ZeroBorg or ThunderBorg. ..
£4.00 £3.60
Ex Tax: £3.00
Based on 0 reviews.
MG966R Large Servo Motor
High torque servo motor with a massive 10kg.cm stall torque. This mighty servo comes with 4 different horns, mounting screws and signal cable. It has metal output gears to reduce the possibility of gear stripping. Stall torque at 4.8V - 9.4k..
£10.99 £9.89
Ex Tax: £8.24
Based on 0 reviews.
Mounting Post Kit for Raspberry Pi
Nylon mounting kit for mounting any model of Raspberry Pi with mounting holes. Each kit contains: 4x M2.5 Nylon Nuts 4x M2.5 Nylon screws 4x M2.5 Nylon posts   ..
£3.40 £3.06
Ex Tax: £2.55
Based on 0 reviews.
Post Kit - Compatible with BattBorg
2 nylon washers, nylon post, m3 nylon nut and m3 thread nylon screw. Correct length for mounting BattBorg to a PicoBorg Reverse. ..
£1.50 £1.35
Ex Tax: £1.13
Based on 0 reviews.
SG92R Small Servo Motor
Micro servo motor for turning tiny things. It has 2.5kg.cm stall torque. This tiny servo comes with 3 different horns, mounting screws and signal cable. Stall torque at 4.8V - 2.5kg.cm Maximum rotation 180 degrees Supply voltage - 3.0 to ..
£7.99 £7.19
Ex Tax: £5.99
Based on 0 reviews.
Small 5V Stepper Motor (Five Wire)
Five wire, 5v stepper motor suitable for use with PicoBorg. Wire to your PicoBorg as follows: M1+ Not connected M1- Stepper Blue M2+ Stepper Red (center tap) M2- Stepper Yellow ..
£4.50 £4.05
Ex Tax: £3.38
Based on 0 reviews.
Socket Driver 5.5mm
Socket drivers are useful for tightening up nuts and bolts on your robots. Perfect for tightening motor mounts on YetiBorg v2 and DiddyBorg v2. ..
£4.50 £4.05
Ex Tax: £3.38
Based on 0 reviews.
Ultrasonic Module Mount Kit for HC-SR04
Mounting kit for the HC-SR04 ultrasonic sensor module. Includes stainless steel mount, a 4 pin cable, 4 screws and 4 nuts. Shipped flat, it can easily be bent to 90 degrees. Repeated bending can cause metal fatigue. To avoid the risk of sharp b..
£4.99 £4.49
Ex Tax: £3.74
Based on 0 reviews.
YetiBorg Wheel Pair with Narrow Profile
Wheels as used on our YetiBorg Formula Pi racing robots. They come in two different widths; narrow or wide profile. Both have a standard 12mm hex connector and work perfectly with our brass hubs and motors. This is the narrow profile wheel. W..
£12.00 £10.80
Ex Tax: £9.00
Based on 0 reviews.
YetiBorg Wheel Pair with Wide Profile
Wheels as used on our YetiBorg Formula Pi racing robots. They come in two different widths; narrow or wide profile. Both have a standard 12mm hex connector and work perfectly with our brass hubs and motors. This is the wide profile ..
£12.00 £10.80
Ex Tax: £9.00
Based on 0 reviews.