DiddyBorg Red Edition - Because red ones go faster

Parts and spares for your DiddyBorg Red Edition.

DiddyBorg Perspex only in Red

Perspex Chassis plate, top plate and camera mount in Translucent Red.

£25.00
Product: 
Stock: 
0

Single 12V metal motor and wheel set

These motors provide DiddyBorg Red Edition with his torque and speed, allowing him to climb inclines quickly.
Quality 12V 100RPM metal motor with mounts, hub and wheel. Also includes allen key and grub screw.
Single motor, Six of these are required for DiddyBorg Red Edition.

£17.99
Product: 
Stock: 
14

DiddyBorg Perspex only in Black

Perspex Chassis plate, top plate and camera mount in Black.

£25.00
Product: 
Stock: 
10

DiddyBorg Perspex only in Clear

Perspex Chassis plate, top plate and camera mount in Clear.
This is the Clear one, despite the Picture ^_^

£25.00
Product: 
Stock: 
8

DiddyBorg Screw and post set

Screw kit. Includes
2x M2x8 Nylon screw
2x M2 Nut
2x M2 Washers

4x M2.5 Screw
4x M2.5x10 white post
4x M2.5 nut

24x M3x12 Cheese screw
52x M3 Spring washer
16x M3 Lock nut
12x M3x8 Cheese screw
8x M3x40 Black Nylon post
11x M3 Black Nylon nut
3x M3x10 black post
3x M3 Black Screw

6x M4x5 Cheese screw

Black and Red Wire
Reuseable Cable Tie

[Please note it does not include]
Motor grub screw - purchased with motor
Motor mounts - purchased with motor
Motor Hub - purchased with motor
Allen key - purchased with motor
Comms cables - purchased with PicoBorg Reverse
M3 white washers - purchased with BattBorg kit (or battborg post kit)

£22.00
Product: 
Stock: 
3

BattBorg Soldered board

The BattBorg provides DiddyBorg with a steady 5v for running the Raspberry Pi and USB devices.
Soldered BattBorg board, 3-pin cable, and mounting post.

£13.00
Product: 
Stock: 
33

PicoBorg Reverse

The power behind DiddyBorg, this board drives the six motors with on-board speed and direction control.
Includes PicoBorg Reverse controller PCB, mounting screws, mounting post, jumper and RPi connector cables

Click here for more details on PicoBorg Reverse.

£32.00
Product: 
Stock: 
0

Single 6V metal motor and wheel set

These motors provide DiddyBorg with his torque and grip, allowing him to climb inclines with ease.
Quality 6V 60RPM metal motor with mounts, hub and wheel. Also includes allen key and grub screw.
Single motor, Six of these are required for DiddyBorg.

£14.00
Product: 
Stock: 
0

10x AA battery holder

The power source which runs DiddyBorg.
Battery holder for 10x AA batteries, with 9V style connector.
Comes with matching 9V connector with wires.
With 10x AA batteries, DiddyBorg should run for approximately 25% longer than 8x AAs.
Batteries not included.

£3.30
Product: 
Stock: 
11

Quality 9V cable

Quality 9V connector cable for use with the AA battery holder.
Thick 22AWG 1061 UL/CSA approved wires offer lower resistance then the standard 9V connector cables, allowing DiddyBorg to run for longer.
A must for getting the most life from your AA batteries.

£2.20
Product: 
Stock: 
20