My Account

Wish List (0)


The PiBorg store is closed and we are unable to ship orders.
You will not be able to checkout any orders at this time.

ZeroBorg - Build ZeroBorg - Build Feed

ZeroBorg - Build

Written by in Build, YetiBorg - Build, ZeroBorg - Build on

Installation issues Permission denied, file not found, 404 or similar: There are a few possible causes of this: Out of disk space: We have occasionally seen this with people who have smaller SD cards, check by using df If the Use% column reads 99 or 100% on rootfs you probably need to remove some files to free up space Unable to find file / 404: Most likely the...

0 Comments

Written by in Build, ZeroBorg - Build on

Quad motor controller Power input Voltage 2.7-10.8V Power output Current Max 1.5A per channel continuous Power switch and emergency power off switch connectors Speed Control via PWM and bidirectional Controls 4× DC motors or 2× stepper motors (4,5, or 6 wire) Dual 10bit analog inputs for sensors or pots (range 0-3.3V) Optional 5V regulator for powering the Raspberry Pi (requires input voltage of 7-10.8V) Optional IR sensor for control by TV remote Optional on-board...

0 Comments

Written by in Build, ZeroBorg - Build on

Installation Mounting Two basic mounting options are provided: The first option is to mount the ZeroBorg underneath of a Raspberry Pi Zero using the four mounting posts to hold the Raspberry Pi Zero in place. This will need a 6-pin female connector to be attached to the Raspberry Pi Zero like this: alternatively if you would rather not solder the 6-pin connector you can...

0 Comments

Written by in Build, ZeroBorg - Build on

Main Examples Download and installation instructions can be found on the getting started tab, as well as wiring instructions for the motor(s) and power. The package of examples can be downloaded as a zip file directly: http://www.piborg.org/downloads/zeroborg/examples.zip You can also get the examples and descriptions on the GitHub page: piborg/zeroborg. ZeroBorg.py This is the main library for ZeroBorg. It makes life easier by providing simple named functions...

0 Comments

Written by in Build, ZeroBorg - Build on

The ZeroBorg is our new add on board for controlling motors using the incredible $5 computer the Raspberry Pi Zero.   The ZeroBorg with a Pi Zero and battery Its small size means it fits neatly below a Raspberry Pi Zero and opens up endless possibilities for tiny robot designs! A Raspberry Pi Zero, ZeroBorg and a 9V battery weigh as little as 65g!...

0 Comments

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.