PiBorg is still open and we are still shipping orders.
We expect orders may be delayed by a day or two due to COVID-19.
Battery Holder (8 x AA)
Product Code:MMP-1190
£2.00
Ex.Tax
£1.67
Bulk Discounts
5 or more £1.67
Qty
Availability: 109
Our favourite way to power our robots is using AA batteries. They're readily available and pose a lower risk of fire compared to Lithium based batteries, especially when learning about robotics.
To secure your batteries you need a good holder, and we have sizes from 2AA to 10AA to provide the right power for your projects.
This 8x AA holder is good for 9.6 V with rechargeables or 12 V with alkalines.
Each holder comes with a PP3 style connector (the same as on a 9V battery).
To use this holder you will probably need a 9v (PP3) style connection cable, which is not included. If you are going to draw a large amount of current, for example powering motors, we recommend using the 9V High Quality Connector.
Specification
- Battery Cell Size: AA
- Number of Cells: 8
- Body Material Polypropylene Resin
- 57mm x 64mm x 29mm
- PP3 Clip Connector
/MMP-0130-200x110.jpg "BattBorg - Pi Battery Power Board (Soldered Kit)")
