Written by Kim Freeburn in RockyBorg - Build on Aug 01, 2019
Our latest robot kit that really rocks!
Written by Arron Churchill in Build, RockyBorg - Build on Aug 01, 2019
Once assembled the RockyBorg needs to be calibrated so that the steering moves over the correct range. Calibrating the servo / steering Start by clicking on the "RockyBorg Tuning GUI" link on the desktop. You may get a dialog asking you what you want to do, select the Execute option to load the GUI. The GUI will start by show the currently set calibration values. Move the slider down until the...
Written by Arron Churchill in Build, RockyBorg - Build on Jul 30, 2019
The RockyBorg software is designed to work with Raspbian. We recommend setting up your SD card with a copy of Raspbian and setting up the software prior to assembling your RockyBorg to make things easier. Before following these instructions you will need to: Setup your SD card with Raspbian as explained here Fit the SD card into the Raspberry Pi you will be using Power up the Raspberry Pi Connect the Raspberry...
Written by PiBorg in Build, RockyBorg - Build on Jul 29, 2019
How to build a RockyBorg kit Here you'll find the instructions on how to build a RockyBorg kit from PiBorg. Before you embark on this journey of makery goodness, we recommend you set up your Raspberry Pi ready for being placed in the build. Follow the instructions from our Software Install Guide to get ready to build. Once your Pi is ready to go, start following the steps below: What's in the kit: